this are real early images.

use the procedure on

http://TuxScreen.net/wiki/view/Main/InfernoRemote

to get hooked up to a remote Inferno. Then see:

http://TuxScreen.net/wiki/view/Main/FlashUnlock

to get your flash unlocked.

then enter the command:

c D!blob F!all

to install blob, wait 30 seconds and power cycle the device

then use blob to install the kernel and rootfs and reboot!

Thanx to RussDill for the patches!

These images have frame buffer, keyboard and pcmcia support.
TimRiker has tested a CF "Socket" ne2k card that works.

=== To rebuild the kernel source ===

Get linux-2.4.6.tar.bz2 from 
kernels ftp://ftp.us.kernel.org/pub/linux/kernel/v2.4/

get patch-2.4.6-rmk2.bz2 from
ftp://ftp.arm.linux.org.uk/pub/armlinux/source/kernel-patches/v2.4/

get diff-2.4.6-rmk2-np1.gz from
ftp://ftp.arm.linux.org.uk/pub/armlinux/people/nico/

get patch-2.4.6-rmk2-np1-tux3.bz2 from
http://russ.dhs.org/files/tuxpatches/

and the config from here. TimRiker added a hole mess
of static compiled stuff as there is space for it.

get blob source from SourceForge blob site <- can brick your machine,
so don't do this till we get a release out. use the binary in this
directory.

Tim "BZFlag" Riker <Tim@Rikers.org>